View XR2T-1611-N_4548718.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IC Sockets
XR2
OMRON's IC Connectors Have Excellent Reliability and Can Tolerate Momentary Interruptions in Power.
* Round pins and 4-point (4-finger) contact construction with contact entry holes that are large for easy insertion. * IC lead contacts placed high for solid connections. * A wide product range: open-frame, closed-frame, singlerow, carrier-type DIP terminals, wrap terminals, soldersleeve terminals, and low-profile DIP terminals. * Conforms to UL standards (file no. E 103202) and CSA standards (file no. LR 62678).
Construction
Inner clip Base
Contact Dimensions
DIP Terminals
1.83 dia.
Wrap Terminals
1.83 dia.
Low-profile DIP Terminals
1.83 dia.
Solder-sleeve Terminals
1.83 dia.
Outer sleeve
Carrier Inner clip 0.79 dia.
1.35 dia.
0.51 dia. 0.635 0.635
Outer sleeve
Ratings and Characteristics
Item Rated current Rated voltage Contact resistance Insulation resistance Dielectric strength Contact insertion (See note.) Contact removal (See note.) Insertion durability Gold plated Gold flash plated 1A 300 VAC 20 m max. (at 20 mV, 100 mA max.) 1,000 M min. (at 500 VDC) 1,000 VAC for 1 min (leakage current: 1 mA max.) 400 gf (3.92 N) max. 65 gf (0.64 N) min. with gold plating or with solder plating
Applicable Wrap Post Wire Sizes
AWG30, AWG28, AWG26, AWG24 (Solid wire: 0.25 to 0.51 mm dia.)
Wrap Post Length
3 wires
Applicable IC Lead Dimensions
DIP, Wrap, and Solder-sleeve Terminals
Depth x width (mm) Flat lead Round lead 0.29 0.09 x 0.46 0.08 (See note.) 0.53 dia. max. 0.41 dia. min.
100 times (0.75-m gold plating), 20 times 50 times (0.25-m gold plating) Ambient temperature Operating: -55 to 125C (with no icing)
Note: The contact insertion force and contact removal force are for a test gauge, t = 0.432 mm.
Note: Do not use wire where the diagonal is more than 0.56 mm.
Materials and Finish
Base Carrier Inner clip Outer sleeve Fiber-glass reinforced PBT resin (UL94V-0)/black Aluminum Beryllium copper/nickel base, gold plated Brass/nickel base, gold flash plating
Low-profile DIP Terminals
Depth x width (mm) Flat lead Round lead 0.29 0.09 x 0.46 0.08 (See note.) 0.50 dia. max. 0.41 dia. min.
Note: Do not use wire where the diagonal is more than 0.52 mm.
Note: For non-standard plating, contact your OMRON representative.
IC Sockets
XR2
111
XR2A Open-frame Sockets
Dimensions
XR2A-@@11-N XR2A-2463-N XR2A-2473-N XR2A-@@01-N XR2A-2461-N XR2A-2471-N XR2A-@@21-N XR2A-2467-N XR2A-2477-N (With DIP terminals)
0.51 dia. 1.33 dia. DIP terminals 0.635 x 0.635 Wrap terminals
Dimensions
No. of contacts Dimensions (mm) A 8 14 16 18 20 22 24 (See note 1.) 24 (See note 2.) 24 (See note 3.) 28 32
Mounting holes (bottom view)
B 7.62 15.24 17.78 20.32 22.86 25.40 27.94 27.94 27.94 33.02 38.10 48.26 50.80 58.42 60.96 78.74
7.62 7.62 7.62 7.62 7.62 10.16 15.24 10.16 7.62 15.24 15.24 15.24 15.24 15.24 22.86 22.86
XR2A-@@02 (With wrap terminals)
40 42 48 50 64
0.8 0.05 dia. (DIP terminals) 1.0 0.05 dia. (Wrap terminals)
Note: 1. XR2A-2401-N/XR2A-2402/ XR2A-2411N/XR2A-2421-N 2. XR2A-2461-N/XR2A-2463-N/ XR2A-2467-N 3. XR2A-2471-N/XR2A-2473-N/ XR2A-2477-N
Ordering Information
Appearance Sockets with DIP terminals Sockets with wrap terminals
No of contacts 8 14 16 18 20 22 24 24 24 28 32 40 42 48 50 64
Row pitch (A) (mm) 7.62 7.62 7.62 7.62 7.62 10.16 15.24 10.16 7.62 15.24 15.24 15.24 15.24 15.24 22.86 22.86
With 0.25-m gold plating XR2A-0811-N XR2A-1411-N XR2A-1611-N XR2A-1811-N XR2A-2011-N XR2A-2211-N XR2A-2411-N XR2A-2463-N XR2A-2473-N XR2A-2811-N XR2A-3211-N XR2A-4011-N XR2A-4211-N XR2A-4811-N XR2A-5011-N XR2A-6411-N
With 0.75-m gold plating XR2A-0801-N XR2A-1401-N XR2A-1601-N XR2A-1801-N XR2A-2001-N XR2A-2201-N XR2A-2401-N XR2A-2461-N XR2A-2471-N XR2A-2801-N XR2A-3201-N XR2A-4001-N XR2A-4201-N XR2A-4801-N XR2A-5001-N XR2A-6401-N
With gold flash plating XR2A-0821-N XR2A-1421-N XR2A-1621-N XR2A-1821-N XR2A-2021-N XR2A-2221-N XR2A-2421-N XR2A-2467-N XR2A-2477-N XR2A-2821-N XR2A-3221-N XR2A-4021-N XR2A-4221-N -- -- --
With 0.75-m gold plating XR2A-0802 XR2A-1402 XR2A-1602 XR2A-1802 XR2A-2002 XR2A-2202 XR2A-2402 -- XR2A-2472 XR2A-2802 XR2A-3202 XR2A-4002 XR2A-4202 XR2A-4802 -- XR2A-6402
112
IC Sockets
XR2
XR2A Open-frame Sockets (with Low-profile DIP Terminals)
Dimensions
XR2A-@@15 XR2A-2466 XR2A-2476 XR2A-@@05 XR2A-2465 XR2A-2475 XR2A-@@25 XR2A-2468 XR2A-2478 (With low-profile DIP terminals) Dimensions
No. of contacts Dimensions (mm) A 8 14 16 18 20 22 24 (See note 1.)
0.79 dia.
B 7.62 15.24 17.78 20.32 22.86 25.40 27.94 27.94 27.94 33.02 38.10 48.26 50.80 58.42 78.74
7.62 7.62 7.62 7.62 7.62 10.16 15.24 10.16 7.62 15.24 15.24 15.24 15.24 15.24 22.86
24 (See note 2.) 24 (See note 3.)
Mounting holes (bottom view)
28 32 40 42 48 64
0.9 0.05 dia.
Note: 1. XR2A-2415/XR2A-2405/ XR2A-2425 2. XR2A-2466/XR2A-2465/ XR2A-2468 3. XR2A-2476/XR2A-2475/ XR2A-2478
Ordering Information
Appearance Sockets with DIP terminals
No. of contacts 8 14 16 18 20 22 24 24 24 28 32 40 42 48 64
Row pitch (A) (mm) 7.62 7.62 7.62 7.62 7.62 10.16 15.24 10.16 7.62 15.24 15.24 15.24 15.24 15.24 22.86
With 0.25-m gold plating XR2A-0815 XR2A-1415 XR2A-1615 XR2A-1815 XR2A-2015 XR2A-2215 XR2A-2415 XR2A-2466 XR2A-2476 XR2A-2815 XR2A-3215 XR2A-4015 XR2A-4215 XR2A-4815 XR2A-6415
With 0.75-m gold plating XR2A-0805 XR2A-1405 XR2A-1605 XR2A-1805 XR2A-2005 XR2A-2205 XR2A-2405 XR2A-2465 XR2A-2475 XR2A-2805 XR2A-3205 XR2A-4005 XR2A-4205 XR2A-4805 XR2A-6405
With gold flash plating XR2A-0825 XR2A-1425 XR2A-1625 XR2A-1825 XR2A-2025 XR2A-2225 XR2A-2425 XR2A-2468 XR2A-2478 XR2A-2825 XR2A-3225 XR2A-4025 -- -- --
IC Sockets
XR2
113
XR2B Closed-frame Sockets
Dimensions
XR2B-1611-N XR2B-1601-N
Mounting holes (bottom view) 0.8 0.05 dia. (DIP terminals)
0.51 dia. 1.33 dia.
XR2B-@@11-N XR2B-@@01-N
Dimensions
No. of contacts 16 24 28 32 40 Dimensions (mm) A 7.62 15.24 15.24 15.24 15.24 B 17.78 27.94 33.02 38.10 48.26
0.51 dia. 1.33 dia.
Ordering Information
Appearance Sockets with DIP terminals
No. of contacts 16 24 28 32 40
Row pitch (A) (mm) 7.62 15.24 15.24 15.24 15.24
With 0.25-m gold plating XR2B-1611-N XR2B-2411-N XR2B-2811-N XR2B-3211-N XR2B-4011-N
With 0.75-m gold plating XR2B-1601-N XR2B-2401-N XR2B-2801-N XR2B-3201-N XR2B-4001-N
114
IC Sockets
XR2
XR2T Open-frame Sockets with Seal Tape
* Equipped with seal tape to prevent flux cleaning liquids from entering the Socket. * The same round-pin, 4-point contact structure as the RX2A is used for the contacts. * The seal tape is made of transparent polyethyle (adhesive portion) and yellow polypropolyene (non-adhesive portion).
Dimensions
XR2T-@@11-N XR2T-2463-N XR2T-2473-N XR2T-@@01-N XR2T-2461-N XR2T-2471-N XR2T-@@21-N XR2T-2467-N XR2T-2477-N Dimensions
Adhesive side Non-adhesive side
No. of contacts Dimensions (mm) A 8 14 16 18 20 22 24 (See note 1.) 7.62 7.62 7.62 7.62 7.62 10.16 15.24 10.16 7.62 15.24 15.24 15.24 15.24 B 7.62 15.24 17.78 20.32 22.86 25.40 27.94 27.94 27.94 33.02 38.10 48.26 58.42
Seal tape
0.51 dia. 1.33 dia.
24 (See note 2.) 24 (See note 3.) 28 32 40
0.8 0.05 dia. (DIP terminals)
Mounting holes (bottom view)
48
Note: 1. XR2T-2411-N/XR2T-2401-N/ XR2A-2421-N 2. XR2T-2463-N/XR2T-2461-N/ XR2T-2467-N 3. XR2T-2473-N/XR2T-2471-N/ XR2T-2477-N
Ordering Information
Appearance Sockets with DIP terminals
No. of contacts 8 14 16 18 20 22 24 24 24 28 32 40 48
Row pitch (A) (mm) 7.62 7.62 7.62 7.62 7.62 10.16 15.24 10.16 7.62 15.24 15.24 15.24 15.24
With 0.25-m gold plating XR2T-0811-N XR2T-1411-N XR2T-1611-N XR2T-1811-N XR2T-2011-N XR2T-2211-N XR2T-2411-N XR2T-2463-N XR2T-2473-N XR2T-2811-N XR2T-3211-N XR2T-4011-N XR2T-4811-N
With 0.75-m gold plating XR2T-0801-N XR2T-1401-N XR2T-1601-N XR2T-1801-N XR2T-2001-N XR2T-2201-N XR2T-2401-N XR2T-2461-N XR2T-2471-N XR2T-2801-N XR2T-3201-N XR2T-4001-N XR2T-4801-N
With gold flash plating XR2T-0821-N XR2T-1421-N XR2T-1621-N XR2T-1821-N XR2T-2021-N XR2T-2221-N XR2T-2421-N XR2T-2467-N XR2T-2477-N XR2T-2821-N XR2T-3221-N XR2T-4021-N ---
IC Sockets
XR2
115
XR2C Single-row Sockets
Dimensions
XR2C-@@11-N XR2C-@@01-N XR2C-@@21-N (With DIP terminals)
0.51 dia. 1.33 dia. Mounting holes (bottom view)
XR2C-@@15 XR2C-@@05 XR2C-@@25 (With low-profile DIP terminals)
0.8 0.05 dia. (DIP terminals) 1.0 0.05 dia. (Wrap terminals 0.9 0.05 dia. (Low-profile DIP
Dimensions
0.79 dia.
XR2C-@@02 (With wrap terminals)
No. of contacts 20 32
A (mm) 48.26 78.74
0.64 x 0.64
Ordering Information
Appearance Sockets with DIP terminals No. of contacts 10 16 20 32 Sockets with low-profile DIP terminals 20 With 0.25-m gold plating XR2C-1011-N XR2C-1611-N XR2C-2011-N XR2C-3211-N XR2C-2015 With 0.75-m gold plating -- -- XR2C-2001-N XR2C-3201-N XR2C-2005 -- -- XR2C-2021-N XR2C-3221-N XR2C-2025 With gold flash plating
32
XR2C-3215
XR2C-3205
XR2C-3225
Sockets with wrap terminals
20
--
XR2C-2002
--
32
--
XR2C-3202
--
116
IC Sockets
XR2
XR2D Double-row Carrier Sockets
Dimensions
XR2D-@@01-N (With DIP terminals)
Mounting holes (bottom view) 0.8 0.05 dia. (DIP terminals) 1.5 0.05 dia. (Solder-sleeve terminals)
1.5 dia.
XR2D-@@04 (With solder-sleeve terminals)
Dimensions
No. of contacts Dimensions (mm) A 8 7.62 7.62 7.62 7.62 7.62 15.24 15.24 15.24 15.24 B 7.62 15.24 17.78 20.32 22.86 27.94 33.02 38.10 48.26
0.51 dia. 1.83 dia. DIP terminals
1.36 dia. 1.83 dia. Solder-sleeve terminals
14 16 18 20 24 28 32 40
Ordering Information
Appearance Sockets with DIP terminals Sockets with soldersleeve terminals
No. of contacts 8 14 16 18 20 24 28 32 40
Row pitch (A) (mm) 7.62 7.62 7.62 7.62 7.62 15.24 15.24 15.24 15.24
With 0.75-m gold plating XR2D-0801-N XR2D-1401-N XR2D-1601-N XR2D-1801-N XR2D-2001-N XR2D-2401-N XR2D-2801-N XR2D-3201-N XR2D-4001-N
With 0.75-m gold plating XR2D-0804 XR2D-1404 XR2D-1604 XR2D-1804 XR2D-2004 XR2D-2404 XR2D-2804 XR2D-3204 XR2D-4004
IC Sockets
XR2
117
XR2E Single-row Carrier Sockets
Dimensions
XR2E-3201-N (With DIP terminals)
2 dia.
0.51 dia. 1.8 dia.
1.36 dia. 1.83 dia. (Solder-sleeve terminals)
XR2E-3204 (With solder-sleeve terminals)
(DIP terminals)
Mounting holes (bottom view) 0.8 0.05 dia. (DIP terminals) 1.5 0.05 dia. (Solder-sleeve terminals)
Ordering Information
Appearance Sockets with DIP Terminals Sockets with Soldersleeve Terminals
No. of contacts 32
With 0.75-m gold plating XR2E-3201-N
With 0.75-m gold plating XR2E-3204
118
IC Sockets
XR2
XR2H ZIP (Zigzag) Sockets
Dimensions
XR2H-@@11-N (With DIP terminals)
Dimensions
No. of contacts 16 20 24 28 Dimensions (mm) A 17.78 22.86 27.94 33.02 B 21.5 26.5 31.6 36.7
Mounting holes (bottom view) 0.8 0.05 dia.
Ordering Information
Appearance Sockets with DIP terminals
No. of contacts 16 20 24 28
With 0.25-m gold plating XR2H-1611-N XR2H-2011-N XR2H-2411-N XR2H-2811-N
IC Sockets
XR2
119
XR2P Single-row Round Pin Plugs
Single-row Round Pins for Low-profile Stacking
* Single row with 2.54-mm pitch. * Low-profile stacking possible in combination with Single-row IC Sockets (XR2C). * Easily divided into the desired number of contacts.
Ratings and Characteristics
Rated current Rated voltage Contact resistance (See note.) Insulation resistance Dielectric strength Ambient operating temperature 1A 300 VAC 20 m max. (at 20 mV, 10 mA max.) 1,000 M min. (at 500 VDC) 1,000 VAC for 1 min (leakage current: 1 mA max.) -55 to 125C (with no icing at low temperature)
Materials and Finish
Base Contacts Mating end Terminal Fiber-glass reinforced PBT resin (UL94V-0)/black Brass/nickel base with 0.25-m gold plating
Applicable Sockets
XR2C-@@11-N XR2C-3215 IC Sockets (single row) IC Socket (single row, low profile)
Note: The contact and vibration resistance are the values when the Plug is mated with an XR2C.
Dimensions
XR2P-@@41 (With DIP straight terminals)
Mounting holes (bottom view) Thirty-two, 0.8 0.05 dia.
1.8 dia. 0.45 dia.
Dimensions
0.45 dia. Terminals (board side)
No. of contacts 10 16 20 32
A (mm) 22.86 38.1 48.26 78.74
Ordering Information
No. of contacts 10 16 20 32 Model XR2P-1041 XR2P-1641 XR2P-2041 XR2P-3241
Mated Dimensions
XR2P-@@41 with XR2C-@@11-N Single-row IC Socket
XR2P-@@41
XR2P-3241 with XR2C-3215 Single-row Low-profile IC Socket
XR2P-3241 with XR2E-3204 Single-row Carrier Socket with Solder-sleeve Terminals
XR2P-3241
XR2P-3241
XR2C-@@11-N
XR2C-3215
XR2E-3204
120
IC Sockets
XR2
Tools and Accessories
XR2Z-11 IC Holder (made from PBT) XR2Z-13
Note: Order the following models in multiples of the minimum order. Model XR2Z-11 XR2Z-13 No. of IC Socket contacts IC socket width 14, 16, 18, 20, 24 24, 28, 32, 40, 42, 48 7.62 m 15.24 mm Order in multiples of 100 500 Note: This Holder protects the IC from falling out due to shock. The IC will not fall out even with a 980 m/s2 shock. Applicable IC height: 2.7 to 5.6 mm.
XY2C-0101 XY2C-0103 IC Removal Tool
Model No. of IC Socket contacts IC socket width 7.62 m 15.24 mm XY2C-0101 14, 16, 18, 20 XY2C-0103 24, 28, 32, 40
Precautions
Correct Use
Soldering
* When soldering, make sure that the outer sleeve of the IC Socket does not stick out of the circuit board through-holes.
Removing ICs
* Use the XY2C-0101 or XY2C-0103 IC Removal Tool to remove ICs. * Do not use a screwdriver to remove the IC. It may damage the circuit board. * Do not use a testing rod or check pin to check contacts or circuits. This may damage the inner clips or plating and may lead to improper contact. * Four-point contact construction is used for plated products to make them more tolerant of momentary power interruptions. We recommend using gold-plated contacts in areas subject to vibration and shock.
Applicable IC Lead Dimensions
1. Use leads that are within the range shown here. For details, refer to the first page of this datasheet. Use an IC with leads longer than 3 mm. If the leads are too long, the IC will not sit flush on the board. 2. Use an IC with tapered leads for easy insertion, a minimum amount of bending, and minimum damage to the leads.
* Make sure that no flux enters the IC Socket from the top.
Automated Soldering Conditions (Jet Flow)
1. Soldering temperature: 2505C 2. Continuous soldering time: Within 5 s
NG
OK
OK
IC Sockets
XR2
121
MEMO
122
IC Sockets
XR2
Omron Electronic Components, LLC
Terms and Conditions of Sales I. GENERAL 1. Definitions: The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Components LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including section III of these Terms. II. SALES 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at the time the purchase order is accepted by Seller. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes: All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier or any claim related to pricing or other charges must be presented in detail in writing to Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER'S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER'S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference.
(b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that could present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. IV. WARRANTY AND LIMITATION 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were correctly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. V. INFORMATION; ETC. 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data: Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications: Product specifications and descriptions may be changed at any time based on improvements or other reasons. It is Seller's practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions: The information on Seller's website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information. VI. MISCELLANEOUS 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision.
IC Sockets
XR2
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information.
Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at http://www.components.omron.com - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONIC COMPONENTS LLC
55 E. Commerce Drive, Suite B Schaumburg, IL 60173
OMRON ON-LINE
Global - http://www.omron.com USA - http://www.components.omron.com
847-882-2288
Cat. No. X304-E-1 01/10 Specifications subject to change without notice Printed in USA
IC Sockets
XR2

▲Up To Search▲

Price & Availability of XR2T-1611-N

	To Download XR2T-1611-N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .